CLICK 'N' COLLECT IN-STORE ONLY Collection in 1-7 days. More info »
TheBUZZYBEE 2is a very simple designed; simple, strong, secure and the best value for your money.
Key features of the BUZZYBEE 2
Assembly:Even though it is not assembled,BUZZYBEE 2is very easy to put together: assemble the wheel support frame to the base using 4 screws, assemble the light support with 2 more screws, install the license plate, slide in the plastic wheel supports, fit the rack to the tow ball with no tools needed and you are ready to go!
Fitting to the car:When you first place theBUZZYBEE 2on the tow ball it supports itself – you can let go of it and it won’t fall to the ground. You’ll then take the weight again, spin the tightening knob until it’s tight, and lock it.BUZZRACK‘s carriers comply with the very exacting standardXPR-18-904-4and therefore include an anti-sway tensioner; this has an integrated handle and 2 or 3 turns are usually sufficient. The video below shows the fitting to the car and the installation of bikes.
Lighting system:TheBUZZYBEE 2comes with a 7 pin lighting system. 7 pin to 13 pin adapter is not included but can be purchased as an option.
Max number of bikes: 2 Max weight per bike: 20kg Max load capacity: 40kg Max tire size: 3.25″ Max bike frame down tube size: diameter 75mm(3″) Fits all ISO 50mm tow ball: yes Dimensions (width x depth x height): 88 x 58 x 70 cm (Height 24cm when folded) Weight: 8.5kg Tilting: no Integrated lighting board: yes Lighting board plug type: 7 pin Bike carrier to tow ball lock: yes Bike carrier to bike lock: no
The maximum permitted load you can carry is also determined by the tow bar nose weight; you will need to check you don’t exceed this before using any tow ball mounted bike carrier. Requires 65mm clearance from center of tow ball to rear of vehicle.